• تهران، جنت آباد جنوبی، نبش میدان چهارباغ، ساختمان سبز، واحد 37

SARV COAT 8823

Epoxy polyamine solvent free COATINGS



Description

Sarv coat 8823 is a two component, polyamine cured, solvent free epoxy coating.

 

Physical Data

 

Finish............................................... Gloss, Semi glass

Colour............................................. upon request

Volume Solids............................... %100

Specific Gravity............................ 1.45 kg/L

Flash Point..................................... 60°C

Touch dry....................................... 24 hrs at 20°C

Hard dry......................................... 1 week at 20°C

Recommended DFT..................... 150-500 mic

Thermal Resistance...................... 140°C

Theoretical Coverage................... 250 g/m2

                                                          500 g/m2

Practical Coverage....................... Depends on loss factor

Shelf life ........................................ 1 year at 25°C

Package.......................................... 4&20 liter container

 

Application Details

Application method .................... Airless spray

Nozzle orifice................................. . .019"-.031"

Nozzle pressure............................. 250 bar/3600 Psi

Application temperature............. 5-50°C

Mixing ratio................................... Base/Hardener 5/ 1by weight

Thinner/Cleaner............................ SVT-88

Pot life ............................................ 1 hrs at 20°C

Recoat interval.............................. Min 24 hrs

                                                           Max 72 hrs

Outstanding Characteristics

  • Excellent mechanical strength
  • High oil resistance
  • High chemical resistance against weak acids and alkalis.
  • Applicable in high film thickness.

Recommended Use

As a solvent free epoxy coating with excellent chemical & mechanical properties, suitable for coating chemical products containers and industrial or marine structures.

Surface Preparation

Remove oil and grease, etc. with suitable detergent. Remove salt and other contaminants by (high pressure) fresh water cleaning.(For maintenance)

Abrasive blasting to Sa 2½ SSPC-10 with a sharp –edged surface profile corresponding to Rugotest No.3, BN9a, Keane- Tator comparator, 2.0 G/S or ISO comparator, medium (G). (For new steel)