• تهران، جنت آباد جنوبی، نبش میدان چهارباغ، ساختمان سبز، واحد 37

SARV COAT 6730

FAST DRYING alkyd TOPCOAT



Description

Sarv coat 6730 is a gloss fast drying alkyd topcoat.

 

Physical Data

 

Finish............................................... Gloss

Colour............................................. Upon request

Volume Solids............................... 48±2%

Specific Gravity............................ 1.2±0.05 gr/cm3

Flash Point..................................... 24°C

Recommended D.F.T................... 40-50 microns

Theoretical coverage.................... 12.5-9.6 sqm/lit.

                                                          10-8 sqm/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 15-20 minutes at 20°C

Hard dry......................................... 16 hrs at 20°C

Fully cured..................................... 14 hrs at 35°C

Shelf life ........................................ 12 months at 20°C

Thermal Resistance...................... Continuous 90°C

                                                      Non-continuous 110°C

Package.......................................... 20 liter container

 

Application Details

Application method..................... Air /Airless spray, Brush, Roller

Application temperature............. 5-50°c

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT- 67

Pot life ............................................ N/A

Recoat interval.............................. Min. 24 hrs.

                                                           Max 1 months

Outstanding Characteristics

  • Water resistance.
  • Gloss and color retention.
  • Excellent weather ability.
  • Resistance to mild corrosive atmospheric zones .

Recommended Use

As a finish coat to be used over Sarv coat 6725 for protection as a topcoat & decorative purposes.

Surface Preparation

The surface must be clean , dry and free from any Contamination such as grease , dirt , salt and loose paint.

Old primed surfaces should be roughened before repainting.